Page 17
The factory settings for the cleaning interval and the duration of
the cleaning cycle are:
4.4.3
Operation and Display
Control Unit Type CU-1
»
Turn on the control unit using switch (7). The green "power"
LED lights up and the nozzle system is ready for operation.
»
If there is no demand for humiditiy the display shows the fol-
lowing message:
»
"On the hygrostat HG-Mini, set the desired relative humidity.
»
"For example, for a set point of 50% RH, turn the knob until
the number 50 is positioned directly at the black mark.
Room hygrostat HG-Mini
Cleaning
cleaning interval
20 min
duration of cleaning
5 sec.
Summary of Contents for CU-1
