HygroMatik CU-1, Manual

Page: 10 / 56

Page 10
Electrical
Warning: Work on the electrical system must be performed by
qualified personnel.
If the electrical power supply malfunctions, switch off the control
unit immediately.
Use only original fuses with the appropriate amperage rating.
Regularly check the control unit's electrical equipment. Promptly
repair any faults, such as loose connections or damaged wiring.
After proper electrical installation or repair, test all safety mecha-
nisms (such as grounding resistance).
The control of theHygroMatik Nozzle System is IP55-protected.
Installing a humidifier in a room without water discharge requires
safety devices to protect against water leakages.
2.3 Disposal after Dismantling
Note: The operator is responsible for the disposal of nozzle sys-
tem components as required by law.