Firmware Version 2.0
MultiSystem 4070
61
Operating software
ENG
•
Independently of the recording time, a table will always contain eleven
lines:
•
Start and end value
•
Nine intermediate values
You can zoom into the table to display intermediate values between two di-
splayed values:
1
Press
.
2
Use
to highlight the lines below which you would like to display the
intermediate values.
3
Press
.
The highlighted value becomes the start and the next the end value; bet-
ween that, nine intermediate values are displayed; if not enough values
are contained in the measurement series to display nine values between
the start and end value, the next 10 measured values will be displayed
after the start value.
4
You can now repeat these steps to show more detailed values, or
press
to undo the zooming step-by-step.
Presentation type “Graph”
RESET
Presentation type “Table”: Zooms out of the table.
ZOOM+
Activates the zoom function.
ZOOM-
Resets the last zoom.