Firmware Version 2.0
MultiSystem 4070
108
Operating software
ENG
Recording
In the
Recording
dialog, you can select the channels that you would like to
save in measurement series as well as the storage options.
Recording time
Storing duration;
enter time value
–
highlight time interval unit
Scanning rate
Time distance between
two measurements in a
series; enter
time
value –
highlight
time unit
Channels
Opens the
Display (channels)
dialog. Select the channels to be stored.
All channels marked with an
check mark are stored.
Select a channel and use
to change highlighting.
SETUP
Opens the
Setup Recording
dialog.
OK
Confirms input/saves changes.
Consider the storing capacity of the measuring instrument when setting these
options. The amount of data will increase if you configure more channels, a longer
recording time, and a shorter scanning time. Large amounts of data may make
evaluation and estimation of measuring results more difficult.