Firmware Version 2.0
MultiSystem 4070
129
Instrument functions
ENG
Transfer and evaluate measured values
Transfer the measurement series from all instruments to a PC. Use the
Com-
bine
function of the
HYDRO
com
software to combine the measurement
series.
Connecting MultiXtend A and T
You can use the MultiXtend A and T instruments to connect additional analog
sensors or thermocouples to the
MultiSystem 4070
. Their signals are digita-
lized by MultiXtend and transmitted to the CAN input of the measuring
instrument. The presentation, recording and evaluation of the measuring data
is then done on the instrument.
The following steps are required to use the MS 4070:
•
Enable CAN bus
•
Program CAN channels
•
Activate MultiXtend power supply
•
Start MultiXtend
Programming and recording with HYDROlink
You can simplify the coupling of instruments by using the
HYDRO
link
software.
• This PC software programs the master instrument and the slave instruments
automatically.
• During the recording, only an MWF file is created, which contains the storage
channels of all participating instruments.