manualshive.com logo in svg

Hydrotechnik MultiSystem 4070, Operating Instructions Manual, Page: 147 / 153

Share
Download
Hydrotechnik MultiSystem 4070 Operating Instructions Manual Download Page 147

Firmware Version 2.0

MultiSystem 4070

 

147

Icon reference

ENG

ALL

Selects all entries.
Removes all selections.

COL/SYM

Opens the 

Display (Symbols/colors)

 dialog.

NOTE

Adds a note.

FORMAT

Formats the selected volume.

FILE

Converts the display to file name.

NAME

Converts the display to series name.

SORT

Sorts the displayed list/table.

>>

Page up

<<

Page down

SCAL

Result display, Graphic presentation: Displays scaling 
instead of the current measurement values.

VALUE

Result display, Graphic presentation: Displays the cur-
rent measurement values instead of scaling.

OK

Confirms input/saves changes.

INFO

Displays information about the selected object.
Displays a preview for saved screenshots.

Display information on selected file

 on 

page 35

DISPLAY

Displays the selected measurement.

Summary of Contents for MultiSystem 4070


























































































































































Reviews:

No comments