Manual-E
Hydroscand Machine AB
Kungsvägen 22
Phone: +46(0) 225-57330
S-783 35 SÄTER
Fax :
+46(0) 225-50108
Sweden
Ed.2 -08
4. The machine
4.1
General
The information for identifying the machine is found on the plates, located
on the outside of the machine. This essentially includes:
Manufacturer
Serial number
Year of manufacture
Voltage (V)
Hertz (H)
Ampere (A)
Weight
The CE-approval plate is located on the back of the machine.
It is strictly forbidden to remove these plates. If one plate is in any way
removed or damaged, always contact an authorized Technical Service
office in order to replace the removed/damaged plate.
When contacting the authorized Technical Service office for any reason
regarding the machine, always indicate:
Model
Serial number
Edition and preparation date of the instruction manual
4.2
Description
The stationary machine consists of one (1) unit, equipped pneumatic system,
which is maneuvered by a foot pedal. The unit is also equipped with a safety
hatch. The machine is designed, manufactured and protected to skive
hydraulic hoses according to previous descriptions, read on from chapter
2
General precautions
.
Any tampering or any maneuvering of the machine NOT described in
this manual may cause damage to people, property or the machine itself
and will exempt Hydroscand Machine AB from any damages.
