Manual-E
Hydroscand Machine AB
Kungsvägen 22
Phone: +46(0) 225-57330
S-783 35 SÄTER
Fax :
+46(0) 225-50108
Sweden
Ed.2 -08
1. Preface
1.1
Introduction to the manual
Before each intervention to the machine or its packaging, all operators
using the machine must read and follow the instructions in the manual
very carefully! Hydroscand Machine AB declines any responsibility for
damage to persons, things or to the machine itself, arising from its
incorrect use, negligence and/or superficial interpretations of safety
concepts in this manual.
This information is the result of continuous, systematic data processing and
technical tests recorded and validated by the manufacturer. All in
accordance with the international procedures 89/392/EEC, 91/368/EEC and
93/68/EEC to ensure the safety of information.
The information is intended
EXCLUSIVELY
for specialized users, capable
of interacting with the product with the utmost safety people, the machine
and the environment demands, interpreting basic diagnostics of problems
and malfunctions and performing simple checks and maintenance. All in full
compliance with the instructions given from the pages that follow and with
current health and safety regulations on site.
The purpose of this manual is to provide the necessary information for
competent, safe use of the machine. The manual does not in depth examine
the topics of disassembly and/or extraordinary maintenance. Our authorized
Technical Service personnel must always carry out these operations.
To handle the machine properly, it is necessary to keep the manual in good
condition for the future. This instruction manual should serve for the
duration of the machine’s operating lifecycle and be available for at least ten
(10) years. Contact the nearest authorized technical service office if you are
in need of a new manual or other information regarding the machine. It is
recommended that this manual be kept in a well known and accessible place
along with other documents related to the machine.
