Manual-E
Hydroscand Machine AB
Kungsvägen 22
Phone: +46(0) 225-57330
S-783 35 SÄTER
Fax :
+46(0) 225-50108
Sweden
Ed.2 -08
Picture 2
5.1
Replacement of the tools
Press the emergency switch button.
Open the front hatch.
Loosen the screws on the adaptor.
The tool is now loose. Dismantle the tool and assemble a new one.
Tighten the screws on the adaptor.
Close the hatch.
Press the reset button.
6. Maintenance
After each working shift always press the emergency switch and remove the
tool. Clean the machine removing process waste and check that the safety
switch is working properly. Regularly one must open the hatch and clean the
machine and check that the safety switch is working. When the security
switch is not working the first step is to open the electric box and push the
button on the security switch. Then close the box and try to start the
machine again. When the machine fails to start you must contact an
electrician.
