Manual-E
Hydroscand Machine AB
Kungsvägen 22
Phone: +46(0) 225-57330
S-783 35 SÄTER
Fax :
+46(0) 225-50108
Sweden
Ed.2 -08
2. General precautions
The use of improper spare parts, changes and/or manipulations not
responding to Hydroscand Machine AB’s specifications shall exempt
Hydroscand Machine AB from any responsibility regarding the proper
use and functioning of the machine, the safety of people and/or
property. It is strictly forbidden to tamper with safety equipment
and/or devices. The local service personnel coordinated by the
authorized Technical Service personnel of Hydroscand Machine AB
must carry out any maintenance operations, except for those specially
described in this manual. Do not skive anything but hydraulic hoses,
e.g. wood or other unknown material that can cause damage to people,
property and/or the machine itself.
2.1
General
Do not remove the information plates on the machine. Make sure the plates
are readable and that you are sure of their meaning. If the plates deteriorate,
replace them immediately with new ones ordered from the appropriate
Technical Service office.
Always make sure in advance that the minimum safety, placement and
operating standards are respected. Taking note of the environmental
conditions, temperature, humidity, lighting, vibrations, suspended dust and
the appropriateness of the area to be occupied.
The machine is constructed to operate indoors (workshop, industries etc.)
where there is no risk of explosion or fire. The skiving machine is designed,
manufactured and protected for skiving hydraulic hoses with dimensions
from 3/16” up to 2”. Any other use is excluded by Hydroscand Machine
AB, who shall be exempted from any liability for damage to people,
property or the machine itself, caused by the improper use of the machine.
Do not leave the machine idle running when not in production.
Before skiving, make sure that the hose is placed steady towards the skive
tool. Also make sure that the hose is held steady so that there is no risk for
injuries or damages.
Disposal of processing waste is always done according to the environmental
regulations on site.
