Manual-E
Hydroscand Machine AB
Kungsvägen 22
Phone: +46(0) 225-57330
S-783 35 SÄTER
Fax :
+46(0) 225-50108
Sweden
Ed.2 -08
5. Start-up
5.1
Preliminary steps
IMPORTANT!
It is essential to determine size measurements and placement in
advance in order to ensure safe placement, running and emergency
actions within the surrounding environment. These conditions should
be respected beginning with the preliminary stages, before skiving
begins.
Place the machine on a steady and flat foundation/table.
Check the air pressure (min. 6 bars) and the electrical system. The
machine has a safety system for “to low air pressure”.
Ensure that the skiving tool is securely tightened.
5.2
Operator position
The placement of the tool/machine in relation of the operator’s position
must make it possible to observe the result of the operation and maintain
safety conditions. During this stage, make sure that the Start/Stop button and
the Emergency switch are not blocked and that there is sufficient visibility
and lighting on the machine, the surrounding area and base.
