Hydronix Hydro-Hub, User Manual

Page: 41 / 75

Remote Access Chapter 5
Hydro-View / Hydro-Hub User Guide HD0864 Rev 1.0.0 41
The software will search for any connected sensors on the network and will display them at
the top of the screen.
Figure 53: Hydro-View Web Browser Access
2.2.2 Hydro-Hub
Before setting up a remote connection to the Hydro-Hub the IP Address of the unit must be
known. To locate the IP address of the Hydro-Hub it is recommended to use Hydro-Com
software. The IP address can be found using the following procedure.
Open Hydro-Com and expand the System Setting section. Expand the Ethernet section and
Hydro-Com will search for available devices. Any connected devices will be listed.
Figure 54: Hydro-Hub IP Address
If more than one Hydronix Ethernet device is connected to the network, ensure the IP
address of any previously configured devices is known before searching. It is recommended
to clear the Ethernet list before searching for a Hydro-Hub on the network. To clear the list
right click on any IP address in the list and select Delete. Once deleted, right click on
Ethernet and select search.
Once the IP Address has been recorded open a compatible internet browser on a machine
connected to the same local network as the Hydro-Hub. Enter the IP address plus the port
number 5000.
For example: 192.168.10.53:5000
The software will search for any connected sensors on the network and will display them at
the top of the screen.