Hydronix Hydro-Hub, User Manual

Page: 62 / 75

Chapter 7 Calibration
62 Hydro-View / Hydro-Hub User Guide HD0864 Rev 1.0.0
Figure 99: Expanded Calibration Graph
The graph can be configured to display any, or all, of the available measurement modes and
best fit lines for the calibration as well as the current calibration points stored in the sensor
(not all sensors support this feature). This enables the user to select the most appropriate
measurement mode for the application (Figure 100)
See the Configuration and Calibration guide HD0679 for advice on selecting the
most suitable measurement mode to use.
Calibration points and
best fit lines for each
measurement mode
Current calibration
points in the sensor for
each measurement
mode
Figure 100: Calibration Graph Selection Panel
2.6
Quick Start Rules
Quick Start Rules are only available with selected sensors. Hydro-Net software will display the
‘Quick Start Rules’ selection box if it is available with the connected sensor (Figure 101).
Figure 101: Quick Start Rules Selector