Hydronix Hydro-Hub User Manual Download Page 28

Page: 28 / 75

Chapter 4

System Overview

28 Hydro-View / Hydro-Hub User Guide HD0864 Rev 1.0.0

1.2.1

Add a Live Display

To display a value from a sensor the screen must be configured. When first opened the live

display is locked, to unlock the display click on the red lock button.

Figure 21: Locked Display

Once unlocked the following options are available:

Add a Display

Save Display

Settings

Figure 22: Unlocked Display

To add a sensor to the display, click on the Add a Display button. The Live display is divided

into three sections.

Live Values

To configure the live display, select the required values on the screen.

Sensor Output Type

Measurement Mode

Selected Sensor

Add Live Display

Figure 23: Live Display Configuration

Additional Live displays can be added by clicking on the Add a Display button.

Trend

The output of each sensor can be displayed graphically by selecting the Trend tab.

Summary of Contents for Hydro-Hub











































































Search results

Summary of Contents for Hydro-Hub

Reviews:

Related manuals for Hydro-Hub

Brands by name

Popular brands

Hydronix Hydro-Hub, User Manual

Search results

Summary of Contents for Hydro-Hub

Reviews:

Related manuals for Hydro-Hub

Brands by name

Popular brands