Hydro-Pro 5, User And Service Manual

Page: 56 / 119

55
d1 Inlet water temp. -9 ℃
～
99 ℃ Real testing value
d2 Outlet water temp. -9 ℃ ～ 99 ℃ Real testing value
d3 Ambient temp. -30 ℃ ～ 70 ℃ flash if Real value<-9
d4 Frequency limitation code 0,1,2,4,8,16 Real testing value
d5 Piping temp. -30 ℃ ～ 70 ℃ flash if Real value<-9
d6 Gas exhaust temperature 0 ℃ ～ C5 ℃ (125 ℃ ) Real testing value
d7 Step of EEV 0
～
99 N*5
d8 Compressor running frequency 0
～
99Hz Real testing value
d9 Compressor current 0 ～ 30A Real testing value
d10 Current fan speed 0-1200 (rpm) Real testing value
d11 Error code for last time All error code
Remark:
d4:Frequency limitation code,
0: No frequency limit; 1:Coil pipe temperature limit;
2: Overheating or overcooling frequency limit; 4:Drive Current frequency limit;
8:Drive voltage frequency limit; 16:Drive high temperature frequency limit
6.2.7 Parameter setting
Select and press to enter, press and to set P0-P16 value.
Note: Long press for 15s to set P14,P17.
P8,P9,P10,P11,P18 parameter is only for factory setting.
6.2.8 Error code
Select and press to check the error code. If the HP is normal, button is invalid.
Code Name Scope Default Remark
P0 Mandatory defrosting 0-1 0
0: Default normal operation
1: Mandatory defrosting subjected to d3
＜
15
℃
P3 Water pump 0-1 0
1:Always running;
0:Depends on the running of compressor
P7 Water temp. calibration -9
～
9 0 Default setting: 0
P14 Reset factory setting 0-1 0
1 ‐ Restore to factory settings
，
0 ‐ default
（
restore
P0,P3,P7,P8,P9,P10,P11 to factory setting
P16
Product code / / Depend on the machine
P17
WIFI Function 0 ‐ 1 1 1:WIFI,automatically recognition
P18
Mode 1—Heating only
，
0—Heating/Cooling/Auto mode