ZT-5400 Powertrain
27
71
70
73
72
74
75
figure 19, Input shaft
InpuT sHafT
Refer to Figure 19
disassembly
1 . Remove all external items previously dis-
cussed in their recommended order .
2 . Remove the retaining ring (75) and dis-
card .
3 . Remove the lip seal (74) and discard .
4 . Remove the washer (73) .
5 . Remove the pump shaft (70) with pressed
on bearing (71) .
NOTE:
Remove the bearing from pump shaft
only if worn or damaged.
5 . Remove the wire ring retainer (72) and
discard . Remove the bearing (71) from the
pump shaft (70) .
Inspection
1 . Inspect the bearing and input shaft for wear
or damage . Inspect the splines on the shaft
for possible damage . Replace if neces-
sary .
assembly
1 . Reassemble all parts in the reverse order
of disassembly .
2 . Install the input shaft assembly into the main
housing .
3 . Install the washer (73) .
4 . Install the new lip seal (74) and new retain-
ing ring (75) .
www.mymowerparts.com
Hydro Gear Parts or New Units Call 606-678-9623 or 606-561-4983