FluidAqua Mobil – FAM 10/15 +AS1000
Safety Information and Instructions
HYDAC Filtertechnik GmbH
en
Page 11 / 80
Proper/Designated Use
The FAM was developed for the dewatering, filtration and degassing of hydraulic
and lubricating oils. It removes free water, emulsified water and a large percentage
of the water to be found in solution.
Any other use shall be deemed to be improper and not in keeping with the product's
designated use; the manufacturer accepts no liability for any damage resulting from
such use.
Proper or designated use of the product extends to the following:
•
Maintaining adherence to all the instructions contained herein.
•
Performing requisite inspection and maintenance work.
Improper Use
Any use deviating from the proper/designated use described above is prohibited.
Improper use may result in hazard to life and limb.
Example of improper use:
•
Operation with non-approved fluids.
Safety Devices
Prior to starting up the FAM unit each time, make sure that all the protective safety
devices are properly installed and are in proper working order.
Safety devices may not be removed until the product has been shut down and se-
cured against being restarted (e.g. warning sign or padlock on the main switch).
When the product is supplied in partial consignments, the safety devices are to be
applied by the operator as specified by law/pertinent regulations.
BEWA FAM10 3417360 en.doc
2008-06-06
