Performing maintenance
CTU 2xxx series
en-US
Page 71 / 108
BeWa CTU2000 3160738h en-us 2018-11-15.docx
2018-11-15
To change the halogen bulb, proceed as follows:
CAUTION
Hot surface
Danger of burns
►
Allow the halogen lights to cool down before
removing them.
1.
Switch the CTU off and allow the halogen
lights to cool down.
2.
Remove the halogen lights by pulling them
out of the light rail.
Pull the bulb socket off.
The halogen light is held in place
in the rail by two clips.
Carefully pull the halogen light out of the
light rail.
3.
Unscrew the bulb holder from the top part
of the light.
4.
Remove the clamping ring.
5.
Insert the new bulb into the bulb holder.
6.
Secure the bulb in the bulb holder using
the clamping ring.
Screw the bulb holder with the fitted bulb
and clamping ring into the top part of the
light.
