Hydac CTU 1000 Series Operating And Maintenance Instructions Manual Download Page 10

Page: 10 / 92

Safety Information

Signal words and their meaning in the safety information and

instructions

In these instructions you will find the following signal words:

DANGER

DANGER – The signal word indicates a hazardous situation with a high level

of risk, which, if not avoided, will result lethal or serious injury.

WARNING

WARNING – The signal word indicates a hazardous situation with a medium

level of risk, which, if not avoided, can result lethal or serious injury.

CAUTION

CAUTION – The signal word indicates a hazardous situation with a low level

of risk, which, if not avoided, can result in minor or moderate injury.

NOTICE

NOTICE – The signal word indicates a hazardous situation with a high level

of risk, which, if not avoided, will result in damage to property.

Structure of the safety information and instructions

All warning instructions in this manual are highlighted with pictograms and

signal words. The pictogram and the signal word indicate the severity of the

danger.
Warning instructions listed before an activity are laid out as follows:

HAZARD SYMBOL

SIGNAL WORD

Type and source of danger

Consequence of the danger

►

Measures to avert danger

CTU 1000 Series

en(us)

Page 10 / 92

BeWa CTU1000 3229578p en-us 2017-04-25.doc

2017-04-25

Summary of Contents for CTU 1000 Series





























































































Search results

Summary of Contents for CTU 1000 Series

Reviews:

Related manuals for CTU 1000 Series

Brands by name

Popular brands

Hydac CTU 1000 Series, Operating And Maintenance Instructions Manual

Search results

Summary of Contents for CTU 1000 Series

Reviews:

Related manuals for CTU 1000 Series

Brands by name

Popular brands