Hydac CTU 1000 Series, Operating And Maintenance Instructions Manual

Page: 59 / 92

Performing inspection / maintenance
User information for the "products under pressure"
The reservoirs of the CTU are simply pressurized products and are thus
excluded in accordance to Article 1, Paragraph f i); 2014/68/EU of the
Pressure Equipment Directive.
As such, the CTU system does not need to be monitored as per the Industrial
Safety Regulation.
The validity of the owner's obligation to "normal" work equipment provision is
not affected by this in accordance with the Labor Protection Law.
Maintenance work overview
The maintenance and servicing to be performed periodically is described in
the following. The CTU’s serviceability, operational reliability and life
substantially depend on performing maintenance and servicing work regularly
and carefully.
P
age
E
ver
y 10
0 h
our
s
of
o
per
at
io
n or
we
ek
ly
600
0 ho
urs
o
r
ann
ual
ly
A
s ne
ede
d or
af
ter
…
at
the l
at
es
t
Check all hoses for leaks or signs of brittleness X
Visually inspect the electrics.
Look for any damage to wires, connectors,
sensors, cabling and electrical equipment in the
control cabinet.
X
Check all screwed connections and other
connectors to ensure that they are firmly
secured.
X
Check that all of the shut-off valves are working
properly
X
Maintenance intervals for CTU 1xx0
with A III cleaner as the test liquid
Replace hoses 60 2 years
Change the fine filter for the test liquid 61 1 year
Change return filters 61 1 year
Calibrate the volume flow meter
68 X
Calibrate the temperature sensor (ultrasound
option only)
68 X
Clean the analysis chamber
68 X
Cleaning the diffuser for the filter membrane
holder
69 X
CTU 1000 Series en(us) Page 59 / 92
BeWa CTU1000 3229578p en-us 2017-04-25.doc 2017-04-25