Hydac CTU 1000 Series Operating And Maintenance Instructions Manual Download Page 36

Page: 36 / 92

Operating the filter membrane holder

Operating the filter membrane holder

When the CTU is delivered, you get the following options to use the filter

membrane holder.

Only close the ball valve (3) to prevent liquid from escaping.

Version with a union nut

The fine thread on the union nut (1) means that the lower part (2) of the

membrane holder is pressed against the upper part preventing leakage and

ensuring that the membrane works properly.

To close the filter membrane holder, lift the lower part (2) up to the upper part

and tighten the union nut (1) clockwise. Do not use a tool.
The filter membrane holder is opened by turning the union nut (1) counter-

clockwise.

CTU 1000 Series

en(us)

Page 36 / 92

BeWa CTU1000 3229578p en-us 2017-04-25.doc

2017-04-25

Summary of Contents for CTU 1000 Series





























































































Search results

Summary of Contents for CTU 1000 Series

Reviews:

Related manuals for CTU 1000 Series

Brands by name

Popular brands

Hydac CTU 1000 Series, Operating And Maintenance Instructions Manual

Search results

Summary of Contents for CTU 1000 Series

Reviews:

Related manuals for CTU 1000 Series

Brands by name

Popular brands