Condition Monitoring Unit CMU 1000
Page 30
V03 R21 - 2020/07/09
HYDAC ELECTRONIC GMBH
Mat.-No.:
669749
Mark the option "
Direct Connection
" option in the window that opens.
Click on "
Change
" to open the window for the interface settings.
Make the corresponding preselection for the port settings in the window that
opens under
Interface selection
.
Select the respective port address and Baud rate under
Interface settings
.
As an alternative, you can also search automatically under
CM device search
for CM devices connected to the PC by pressing "
Start
".
Pressing
"
Refresh
" causes the interfaces marked under
Interface selection
to
be refreshed in terms of availability.
Click on “
OK
“ to apply the modified settings or “
Cancel
“ to discard these
changes. In either case you will then return to the
Connection
window.