Condition Monitoring Unit CMU 1000
Page 63
V03 R21 - 2020/07/09
HYDAC ELECTRONIC GMBH
Mat.-No.:
669749
5.2.5.8 Managing Sensor Constellations
Reliable system monitoring means ensuring that exactly the same sensors that
were connected at the time the CMU 1000 was configured are connected during
operation.
The sensor constellation is used for this purpose. The sensor constellation is a
monitoring instrument for the connected sensor system, i.e. it performs a
continuous comparison between the connected "Actual" sensor system and the
specified "Nominal" sensor system.
(see Chap. 6.1.5. Sensor Constellation)
You can use this function to generate and manage various sensor constellation
files. These constellation files can, like the configuration files, be generated on a
"Master" CMU and then subsequently loaded onto an unlimited number of other
CMUs.
If no sensor constellation has yet been generated in the device then the following
window opens:
You can generate a new sensor constellation in the device by pressing
Create
(in the upper command bar). Afterwards, the following message appears:
You can have the momentarily current sensor constellation in the device
displayed by pressing
Display
(in the upper command bar).
You can delete the momentarily current sensor constellation in the device
displayed by pressing
Delete
(in the upper command bar).
All other functions in the lower command bar (Open, Load, Save, Delete, etc.) and
the selection of the target folder for saving the files are identical with Chapter
5.2.2.6, "Managing configurations".
