HYDAC ELECTRONIC CMU 1000, User Manual

Page: 76 / 126

Condition Monitoring Unit CMU 1000 Page 76
V03 R21 - 2020/07/09 HYDAC ELECTRONIC GMBH Mat.-No.: 669749
6.1.3 Grouping

With
Create grouping
you can join several functions to make an
interconnected unit and transfer and copy these as a block.
 First mark the functions to be grouped by enclosing them in a frame created
with the help of the cursor.
 Afterwards, select “
Group
“ in the menu bar and then “
Create grouping
“ in the
drop-down menu that appears.

Pressing “
Cancel grouping
“ releases the functions linked together in the group
from one another again.
 To accomplish this, mark the desired group with a mouse click on any one of
the functions within the group.
 Afterwards, select “
Group
“ in the menu bar and then “
Cancel grouping
“ in
the drop-down menu that appears.
6.1.4 Device
The " Connection “ function can be used to set up a connection between the PC and a
CMU 1000 from the CM Editor.
The function is identical with the connection setup in the CM Manager. See in this
connection Chap. 5.2.1. ff.