Condition Monitoring Unit CMU 1000
Page 69
V03 R21 - 2020/07/09
HYDAC ELECTRONIC GMBH
Mat.-No.:
669749
5.2.6.3 Change Password
Here you have the opportunity of changing the password. After the
Change
passwort
function has been selected, the following window opens:
-
Enter the previous password in the top line.
-
Enter the new password in the middle line.
-
Repeat the new password in the bottom line.
-
Confirm the action with
OK
(the new password is immediately activated) or
end the action by clicking on
Cancel
without changing the password.
5.2.6.4 Removing Password Protection
To remove the password protection in the device again, select the function
Remove password protection
. The following window opens:
-
Enter the currently valid password.
-
Confirm the action with
OK
(password protection is immediately deactivated)
or end the action by clicking on
Cancel
without deactivating the password
protection.
5.2.6.5 Send Commands
With this menu option it will be possible with future device versions to send
direct commands to the CMU 1000 in order to initiate certain functions there.
This menu option has no function at present.
