Condition Monitoring Unit CMU 1000
Page 12
V03 R21 - 2020/07/09
HYDAC ELECTRONIC GMBH
Mat.-No.:
669749
2.2 Proper/Designated Use
The CMU1000 is an electronic evaluation unit designed for permanent machinery and
systems condition monitoring. The device must be supplied for this purpose with
machine data that is gathered through the connected sensors. The recorded data
(whether processed or unprocessed) can be forwarded by the CMU 1000 through
various interfaces to other units and/or monitoring levels. The device can also
intervene directly in the machine or system being monitored by means of the integrated
analog and digital outputs.
The units of the CMU 1000 family are designed for utilization under difficult conditions
(expanded temperature range). They are thus suitable for direct installation in
machines in not only stationary but also in mobile and robust utilization.
The specifications for these inputs and outputs mean that they are designed especially
for such utilization. Integrated hardware and software functions (operating system)
provide a greater level of protection for the machine.
Warning!
The device may be used only for the types of applications specified in the manual and
only in connection with accessory components authorized by HYDAC ELECTRONIC
GMBH. The trouble-free and safe operation of the product is contingent on proper
transport; on proper storage, setup and installation; and on careful operation and
maintenance.
The application software, the "CM Program", can be readily generated with the "CM
Editor" on a PC by the operator himself/herself. The "CM Editor" is a component part of
the HYDAC PC software "CMWIN", starting with Version 3.0.
Note!
All of the programming procedures and software functions subsequently described in
this documentation refer to the "CM Editor" in accordance with IEC 61131.
The operator is responsible himself/herself for the safe and application-appropriate
functioning of the CM Programs that he or she generates.
2.3 System Configuration
The CMU 1000 is a device concept that is intended for both single operation and
utilization in series. This means that the device can be configured in optimal fashion for
the respective application case. Special functions and special hardware solutions can
also be implemented if required.
Note!
Generally speaking, the following applies:
All of the performances, descriptions and explanations contained in this manual are
generally valid for the standard model of the CMU 1000.
A check must be made in each case before the control module is used to determine
whether particular functions, hardware options, inputs and outputs described in the
documentation are in fact available in the hardware.