Condition Monitoring Unit CMU 1000
Page 37
V03 R21 - 2020/07/09
HYDAC ELECTRONIC GMBH
Mat.-No.:
669749
If the
Connection
window does not open automatically, select
"
Connection
" in the menu bar of the CM Manager.
Mark the option "
Direct Connection
" option in the window that opens.
Click on "
Change
" to open the window for the interface settings.
Make the corresponding preselection for the port settings in the window that
opens under
Interface selection
.
Select the respective port address and Baud rate under
Interface settings
(USB with 460,800 Baud).
Pressing
"
Refresh
" causes the interfaces marked under
Interface selection
to
be refreshed in terms of availability.
Click on “
OK
“ to apply the modified settings or “
Cancel
“ to discard these
changes. In either case you will then return to the
Connection
window.
Click
on
Open
to open the selected interface. The opened interface is indicated
by a green dot on the upper right.
To set up a connection with the "Master" CMU, simply click on
Connect
and
then
OK
.
