Hyco Zen Spa Series, Product Instruction Manual

Page: 12 / 25

• Ensure all tubing is pushed fully into PF connectors and that locking collars
are used to prevent inadvertant removal.
• Use a suitable length of 3/8” tubing (cut using sharp knife, ensuring a clean straight
cut) to connect from mains supply to t-piece supplied.
• Select a suitable location for the scale filter housing ensuring easy access for future
maintenance. The arrow represents the water flow direction and must be followed.
• Depending on installation you may need to remove the filter head from bracket
and rotate 180° to ensure flow arrow is followed.
• To do so first remove filter cartridge. Now grip bracket in one hand and the top
t-section with the other, turn 90° anti clockwise to release.
• Rotate 180° and reinsert t-section, turning 90° in whichever direction is required
depending on installation, to secure.
• Do not locate the filter above an electrical socket or other electrical device.
• Secure the bracket to the wall using the fixings supplied. Replace the scale filter
cartridge.
• Use a suitable length of 3/8” tubing to connect from t-piece to scale filter head
inlet, ensuring water flow arrow is followed.
• Use a suitable length of 3/8” tubing to connect from scale filter head outlet, en-
suring water flow arrow is followed, to manifold inlet using ½“ female to 3/8 “ PF
connector.
12