background image

13. Guarantee

This product is covered by a standard parts or replacement warranty for a period of 2 

years from the date of purchase. 

If there is a manufacturing defect within the warranty period we will send spare parts, 

repair and return the unit or, at our discretion, supply a replacement product. Incorrect 

installation, frost damage, the consequences of limescale deposits or failure to follow 

correct operating and maintenance instructions are excluded. Consequential costs such 

as labour charges or damage to fittings and surroundings are expressly excluded. 

14. Contact Us

If you experience a problem with this product you should first contact our service 

department on 01924 225 200 before taking any further action. Experience has shown 

that issues can often be resolved without the need to return or uninstall the product.

Hyco Manufacturing Ltd

Normandy Court

Express Way

Castleford, WF10 5NR

T     01924 225 200

F     01924 225 210

E     [email protected]

hyco.co.uk

INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE 

WITH THE EUROPEAN DIRECTIVE 2012/19/EU.

At the end of its working life this equipment must not be disposed of as household 

waste. It must be taken to a local authority waste collection centre or to a dealer 

providing this service. Disposing of electrical and electronic equipment separately 

enables its components to be recovered and recycled to obtain significant savings 

in energy and resources. In order to underline the duty to dispose of this equipment 

separately, the product is marked with a crossed out dustbin.

24

Summary of Contents for Zen Spa Series


























Reviews: