Hyco Zen Spa Series, Product Instruction Manual

Page: 17 / 25

Smart Technology
• The boiling water tank has smart technology algorithms that learn and predict
usage: on when you need it, off when you don’t.
• The status ring on the base of the tap will light up red or green depending on the
temperature of the water in the tank.
• The red status ring indicates the water is heating. The green status ring indicates
the water is up to temperature and ready for use.
• When the heater is in a predicted non-use period (sleep mode) the status ring will
be green and fade on and off slowly. To exit this mode, open the boiling side of the
tap and allow water to flow until the status ring flashes green. The heater will then
return to boiling shortly after.
• If the status light begins flashing red this indicates a fault has been detected. The
unit should be isolated from the power supply and the water supply shut off before
contacting Hyco for further advice.
Status Ring Summary
Red Water is heating
Green Water is up to temperature - ready to use
Fading in/ out green Predicted non - use period (sleep mode)
Flashing red Fault detected
5. Operation
• This appliance can be used by children aged 12 plus and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning the use of the appliance in
a safe way.
• Check for signs of discharge from the pressure relief valve.
IMPORTANT
• Following the first boiling cycle it is imperative to check all connections on the
boiling side and tighten all the flexible hoses to and from the tank as these
can loosen on the first boiling cycle.
17