Huvitz HPE-810, User Manual

Page: 46 / 155

46
46
HPE-810 HUVITZ
shape and check the interference.
 According to the Edging Options, you can control the Beveling and Grooving position.

Ratio(%) from the front side of the lens

Distance(mm) from the front side of the lens
 Distance(mm) from the rear side of the lens
 Adjust the position according to the lens base curve
 Auto mode

Adjust the position manually
 Final outputs according to the edging options are different just like the following pictures.
[Ratio(%) mode from the front side]
 Please be cautious that the thinnest part of a lens may be broken when you use ratio (%)
mode from the front side.
[Distance(mm) mode from the front side]
 Using the distance (mm) mode from the front side, the operator can designate the specific
moving distance. However, if the thickness of the thin part is less than twice the
designated value, the machine will process at internal center, which is 50% in ratio.