Huvitz HPE-810, User Manual, Page: 26 / 155

26
26
HPE-810 HUVITZ
5.1.2.
Frame Tracing
①
Place the frame between the upper grippers and the
lower grippers.
②
Move the frame in order that the bridge of frame is
located at the central position between the left and
right side grippers.
③
Press the FRAME button and select the frame
material.
④
Press the Reading button(BOTH, R, L).
5.1.3.
Pattern Tracing
①
Make a marked spot on the optical center of the demo
lens by using Lensmeter.
②
Block the Lens Adaptor at the center of the marked
spot by using Blocker.
③
Place it on the Pattern Holder.
④
Press the FRAME button and select the tracing mode
(LO CURV, HI CURV).
⑤
Press the Reading Button (R, L).
Demo Lens
Lens Adaptor
[How to place the Pattern Holder on the Gripper]
NOTE
 The data will be automatically transmitted after finishing the tracing.
 With one side tracing, the data for R or L will be symmetrically copied to the data of the
other side automatically.
 When tracing pattern or demo lens, press the ‘L’ or ‘R’ button for more than 3 seconds to
execute concave shape tracing mode.

When tracing frame, press the ‘L’, ‘BOTH’ or ‘R’ button for more than 3 seconds to
execute concave shape tracing mode. (if MENU >> ETC >> SEMI-AT option is set to
YES, Semi-Automatic tracing mode will be executed instead of concave mode)

Semi-Automatic tracing mode will is useful for tracing the frame with the lopsided groove.