Huvitz HPE-810, User Manual, Page: 100 / 155

100
100
HPE-810 HUVITZ
6.10.3.
Frame Change Procedure
①
Frame reader reads the lens which will be used in frame change. (when you hold the lens at
pattern holder, you must block the lens adaptor at optical center of lens)
②
The data will be transmitted to the edger after the reading process is completed.
③
Start the job manager at edger, select the frame change lens data transmitted. And then
register it as the frame change lens.
④
Frame reader reads the pattern or frame.
⑤
Start the job manager at edger, load the edging job and input the edging information.
⑥
In detail edging option, choose the frame change mode by touching the feeler icon.
⑦
Look at the frame change guideline displayed, and check if the edging shape can be processed.
⑧
Rest procedures are same with normal edging procedures.
NOTE
In edger + auto-blocker environment, frame change lens is already blocked by auto blocker. So
you don't have to use frame change lens register function, just activate the frame change
mode, and then you can start edging.