Huvitz HPE-810, User Manual

Page: 15 / 155

15
15
stop the operation and ask for the service. If the edging wheel is broken during the
operation, the broken pieces may cause a serious injury
 Be sure not to edge the materials other than the spectacle lenses. Otherwise, it may
weaken the wheel performance and cause a crack on it. If the edging wheel is broken
during the operation, the broken pieces may cause a serious injury.
 Be sure not to operate the product unless the front cover of edging body is fully closed.
Otherwise, it may cause a serious injury.

The machine should be properly installed and operated based on the instructions on this
manual. If the power is turned on without unlocking the locking device for the carriage and
feeler, it may cause damage to the product and cause malfunction of the product.
 Do not disassemble the product without receiving regular training. It may cause electric
shock or serious injury during the operation or cause the malfunction of the product.
 Make sure that the material of the authentic lens is identical with that of selected lens in
the system before starting the edging mode. Otherwise, it may cause damage to the wheel
and shorten the lifetime of wheel.

Safety beveling for a lens made of glass should be processed at both front and rear sides
of the lens. Otherwise, it will cause damage to the wearer’s skin
 The product should be properly installed and maintained at flat and even ground.
Otherwise, it may affect the normal operation of the machine.
 Be sure that your fingers are not caught during clamping.
 When detaching the lens adapter from the process-finished lens, use the Adapter
Remover supplied as the standard accessory. Do not pull out the lens adapter with your
hands.
 Be sure that the water supply hose is not folded or interfered with other objects causing the
problem of water supply. It may deteriorate the quality of lens finishing. The debris of lens
may cause damage to the respiratory organ of human and malfunction of the product.

The water entry should be closed every day.
CAUTION
 When moving the machine, first fix the stage and check whether the power supply is off.
Then, two or more persons should lift the bottom of the product with both hands.
 When setting down the machine, make sure not to be interfered with the obstacles. Set
down the product slowly in order to prevent any injury of human body or damage to the
product.

When moving the machine, make sure the locking device and the screw for the cover are
properly tightened.
 When wrapping the machine, use recommended packaging and shock-absorbing
materials in order to prevent damage during the transportation.

Be sure to use the standard accessories or tools provided together with the product for
!