Huvema HU 320 UM TOPLINE, Manual

Page: 14 / 64

14
CHANGES AND TYPING ERRORS RESERVED CHANGES AND TYPING ERRORS RESERVED
Caution: Check frequently whether the screen of the intake is clean.
4.3.3 M
aCHine
f
raMe
(
iTeM
-2,
paGe
11)
The machine frame is made of cast iron. The rigid box-section frame made of cast iron provides high dimensional
stability and a low-vibration appearance. Hardened and ground onto Z axis slide surface with HRC53 degrees.
On the machine cross slide and vertical slide are constructed. The electrical system and the electrical control panel
are separately with the machine frame.The machine frame is covered with mudguards and therefore easy to clean.
In the machine frame integrates the disguised and therefore easy to clean.
4.3.4 M
aCHine
s
lides
(
iTeM
-5,
paGe
11)
Longitudinal - cross - and vertical slide design are a warp-
resistant cast iron.
The carriage guide
All slides run in high precision milled dovetail guides.
The solid design of the dovetail guides and the optimal
management conditionswe guarantee long life and precise
process.
Each carriage is provided with two wedge bars.
This problem-free adjustment ofthe slide guide is possible.
The vertical guide is hardened (HRC 50-60 degrees)and
ground.
Adjusting handles for carriage (slide)
The carriages are adjusted via flexible with trapezoidal
thread. The handle nuts are made caro-bronze with high
wear resistance. All three flexible handles are adjustable
angle. The drive of the handle is carried out when
longitudinal carriage straight, the cross slide and vertical
carriage over helical gears and hand wheels.
2-3. Description of the machine
2-3-01. The Base (item-6, page14)
The rigidly structure with integrated casting iron the machine frame is constructed.
2-3-02. Coolant System
The coolant tank is located under the machine base with a quick-closure to the
tubes.
The coolant motor is operated via the control panel.
Container capacity: 42 L ; Output: 28 L/MIN
Cleaning the coolant container
Coolant pump with cover plate stand, lift the base cover from the top of base.
When reset or when mounting (hanging) coolant tank, that the groove of the tabs
engage the plate.
Check frequently whether the screen of the intake is clean.
17