Huvema HU 320 UM TOPLINE, Manual

Page: 12 / 64

12
CHANGES AND TYPING ERRORS RESERVED CHANGES AND TYPING ERRORS RESERVED
4.2 M
aCHine ConTrols
No. Element 19No. Element
1 Quill and depth adjusting handle 10 Feeding Rapid Button
2 Horizontal/Vertical exchange handle 11 Stop Button
3 Spindle speed change handle 12 Start Button (with lighting)
4 Clutch handle for Y axis by automatically 13 Power Light (with lighting)
5 Safety Hand wheel for X axis movement 14 Emergency Stop Button
6 Safety Hand wheel for Y axis movement 15 Selector for the ON/OFF Coolant Pump
7 Safety Hand wheel for Z axis movement 16 Selector for Spindle direction
Position: (Reverse-Nature-Forward)
8 Clutch handle for X-Z axes by automatically 17 Stop Button for Spindle Run
9 Feeding Adjusting Button 18 Start Button for Spindle Run
Additional Emergency Stop Button
An emergency stop button (A) is located on the right side of the machine frame.
This emergency stop button can be reached in case of danger from any side of
the machine immediately within 1.5 seconds.