23
CHANGES AND TYPING ERRORS RESERVED
CHANGES AND TYPING ERRORS RESERVED
Horizontal Milling Spindle
To use the flexible handles (1) located on the left side of cross slide, for tightening
and loosening the arbor smoothly. Clamping devices for vertical milling ISO-40 spindle taper with thread M16
4.5.5 C
laMpinG
deviCe
• ISO-40 Spindle taper with threaded M16.
• Arbors (#.5,#6,#7) is can using for both Horizontal & Vertical
milling also.
1. OD-16 Arbor w/ Counter holder.
2. OD-22 Arbor w/ Counter holder
3. OD-27 Arbor w/ Counter holder
4. OD-32 Arbor w/ Counter holder
5. Sleeve adapter (ISO-40/MT-3)
6. Arbor for MT-2
7. Arbor for MT-1
4.5.6. a
rbor
WiTH
s
Teady
deviCe
for
H
orizonTal
M
illinG
To take the arbor steady device from the
machine package, and then to clean out
the anti-rusty oil from this device before
installing.
Using the hex wrench to loosen the M10
hex socket cap screw (1) at first, and then
installing the steady device toward to the
front side of dovetail of ram slowly, please
making sure the brass bushing (2) is
engaged with the steady device as well.
Be careful to installing the longer arbor to
mounting with the horizontal spindle (3)
To insert the longer arbor thru the center
hole of arbor steady device directly, and
then to remove the ram for making sure
the correct distance between the nose
of horizontal spindle and steady device.
Using the hex wrench to tightening the
M10 hex socket cap screw (1) properly.
2-5-06. Arbor with Steady device for Horizontal Milling
To take the arbor steady device from the machine package, and then to clean
out the anti-rusty oil from this device before installing.
Using the hex wrench to loosen the M10 hex socket cap screw (1) at first, and
then installing the steady device toward to the front side of dovetail of ram
slowly, please making sure the brass bushing (2) is engaged with the steady
device as well.
Be careful to installing the longer arbor to mounting with the horizontal spindle
(3)
To insert the longer arbor thru the center hole of arbor steady device directly,
and then to remove the ram for making sure the correct distance between the
nose of horizontal spindle and steady device.
Using the hex wrench to tightening the M10 hex socket cap screw (1) properly.
33
1
2
3
Summary of Contents for HU 320 UM TOPLINE
