Huvema HU 320 UM TOPLINE, Manual

Page: 17 / 64

17
CHANGES AND TYPING ERRORS RESERVED CHANGES AND TYPING ERRORS RESERVED
4.7.8. s
pindle
s
peed
T
ransMission
In machine frame the sliding gear transmission is installed. The gears
are made of high precision. (Hardened and Ground). Turn of spindle
speeds by universal handle By covering the sliding gears switching of
speeds is very smooth.
Turn of spindle speeds by universal handleBy covering the sliding gears
switching of speeds is very smooth.
WARNING: DO NOT push “Spindle Start” button, When you
using this function!
When the teeth are one above the others, as you can push the “JOG”
button for this. Located on the right side of machine frame (1).
4.7.9. s
pindle
s
peed
C
HarT
Unit: rev/min
H L
2000 275
1440 200
1020 135
730 100
530 75
375 50
WARNING: Gearbox never with the enginerunning switch,
otherwise damage!
CAUTION: The gear runs in an oil bath. The right amount of oil
is filled at the factory. Control: Proper oil level in the middle of
the oil level sight glass. Oil change see lubrication schedule on
page 34.