Husqvarna NUDA 900 2012, Workshop Manual, Page: 30 / 363

C.8
NUDA 900 2012/2013 - NUDA 900 R 2012/2013
TROUBLESHOOTING
Manuale d'officina Ed. 11-2011
CHASSIS
Trouble Cause Remedy
Handlebar turns hard
Insufficient tyre pressure Inflate
Bearing adjuster ring nut or steering stem
nut overtightened
Adjust
Bent steering stem Replace bottom yoke
Worn or seized steering bearings Replace
Handlebar vibration
Bent fork legs Replace
Bent front wheel axle Replace
Warped chassis Replace
Bent front wheel rim Replace
Worn front wheel bearings Replace
Improperly balanced wheel Balance
Damping is too hard
Too much oil in fork legs Remove excess oil
Fork oil viscosity too high Change
Overinflated tyres Deflate
Improperly set rear shock absorber Adjust
Damping is too soft
Insufficient oil in fork legs Top up
Fork oil viscosity too low Change
Weak fork springs Replace
Weak rear shock absorber spring Replace
Improperly set rear shock absorber Adjust
(Front / rear) wheel shakes
Bent wheel rim Replace
Worn wheel hub bearings Replace
Wheel axle nut loose Tighten
Worn rear swinging arm bearings Replace
Improperly balanced wheel Balance
Rear suspension is noisy
Worn shock absorber ball joints Replace
Shock absorber faulty Replace
Poor braking (front and rear)
Air in brake system Bleed
Insufficient fluid in tank Top up
Worn brake pad and/or disc Replace
Damaged disc Replace