Husqvarna NUDA 900 2012, Workshop Manual

Page: 275 / 363

L1.17
NUDA 900 2013 - NUDA 900 R 2013
H12049
1
2
Workshop Manual Ed. 11-2011
BRAKES
Brake fluid replacement
For the replacement of the braking system fluid, first of all you need to drain the
existing fluid.
Fluid replacement and system bleeding
Brake fluid should be checked and changed as per the "Maintenance Chart"
(see Section B), or earlier if contaminated with debris or water.
Do not change brake fluid in the rain or with a strong wind.
Use only fluid taken from a sealed container (DOT 4). Never reuse
brake fluid.
Avoid the ingress of contaminants such as dirt, water, etc. into the
reservoir.
Do not keep the reservoir open without its cover longer than neces-
sary; this would increase the risk of contamination.
Handle the fluid with care to avoid damaging the painted parts.
Do not mix two brands of fluid. This would reduce boil-over point,
leading to loss of braking efficiency or degrading of rubber parts.
Changing the front braking system fluid
- Remove the rubber cap (1) of the valve (2) of one of the two callipers.
- Insert the end of a transparent hose in the valve (2) and the other end in a
container.