Husqvarna NUDA 900 2012, Workshop Manual, Page: 247 / 363

L.7
NUDA 900 2012 - NUDA 900 R 2012
H10858
8
9
10
11
12
13
H10927
14
15
16
17
18
H10928
14
15
16
17
18
Workshop Manual Ed. 11-2011
BRAKES
- Loosen the screw (8) and remove the cable ring (9).
- Cut the clamps that fasten the system.
- Loosen the screw (10) and remove the speed sensor (11).
- Remove the calliper (12) with the whole system.
- In case you need to replace the master cylinder (14), open the clamp (15)
and detach the pipe (16) collecting the oil that comes out of the reservoir,
then loosen the coupling (17) and remove the delivery pipe (18).
During the reassembly, position the pipe (13) of the rear brake exactly
in the original position and fasten it with the relevant clamps and
cable ring. Lock the pipe in position with the rear casing/mudguard
and then, if the braking system was disassembled, fill the oil and
bleed the system as described in the relevant paragraph.