Husqvarna Norden 901 2022, Owner'S Manual

Page: 71 / 170

RIDING INSTRUCTIONS 10
69
H02699-10
–
If Easy Shift is enabled in the combination instrument, you
can shift up in the speed range shown without pulling the
clutch lever.
Info
The minimum engine speed before shifting up in revo-
lutions per minute is shown in the figure.
Pull the shift lever quickly back to the stop without
changing the throttle twist grip position.
H02700-10
–
If Easy Shift is enabled in the combination instrument, you
can shift down in the speed range shown without pulling the
clutch lever.
Info
The maximum engine speed before shifting down in
revolutions per minute is shown in the figure.
Depress the shift lever quickly back to the stop with-
out changing the throttle twist grip position.
10.6 MSR
402423-01
The MSR is a function of the engine control.
If the engine braking effect is too great, the MSR prevents the
rear wheel from locking or sliding away on a sloping position.
To avoid slip of the rear wheel, the
MSR only opens the throttle
valve as far as absolutely necessary.
The
MSR
is applied on surfaces, where the friction coefficient is
to low to open the slipper clutch.
To further increase ride safety, the
MSR is slope dependent.
Info
When ABS mode Offroad is active, the MSR is not active.
10.7 Applying the brakes
Warning
Danger of accidents Moisture and dirt impair the brake system.
–
Brake carefully several times to dry out and remove dirt from the brake linings and the brake discs.
Warning
Danger of accidents
A spongy pressure point on the front or rear brake reduces braking efficiency.
–
Check the brake system and do not continue riding until the problem is eliminated. (Your authorized
Husqvarna Motorcycles workshop will be glad to help.)
Warning
Danger of accidents The brake system fails in the event of overheating.
If the foot brake lever is not released, the brake linings drag continuously.
–
Take your foot off the foot brake lever if you do not want to brake.