Husqvarna Norden 901 2022, Owner'S Manual

Page: 153 / 170

TECHNICAL DATA 23
151
Nut, hand brake lever M6 Attach torque to nut.
10 Nm (7.4 lbf ft)
Nut, push rod, foot brake lever M6 6 Nm (4.4 lbf ft)
Nut, shift rod M6LH 6 Nm (4.4 lbf ft)
Remaining nuts, chassis M6 10 Nm (7.4 lbf ft)
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Screw, 6-D sensor M6 5 Nm (3.7 lbf ft)
Screw, ABS module on holder M6x12 8 Nm (5.9 lbf ft)
Screw, ABS module retaining
bracket on frame M6x18 10 Nm (7.4 lbf ft)
Loctite ® 243™
Screw, activated carbon filter on
retaining bracket M6 8 Nm (5.9 lbf ft)
Loctite
®
243™
Screw, ball joint of push rod on
foot brake cylinder M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, battery holding bracket M6 4.5 Nm (3.32 lbf ft)
Screw, battery terminal M6 4.5 Nm (3.32 lbf ft)
Screw, brace for mask support M6x16 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, brake assembly M6 5 Nm (3.7 lbf ft)
Screw, cable on starter motor M6 5 Nm (3.7 lbf ft)
Screw, cable on starter relay M6 4.5 Nm (3.32 lbf ft)
Screw, chain guide M6 10 Nm (7.4 lbf ft)
Loctite ® 243™
Screw, clutch assembly M6 5 Nm (3.7 lbf ft)
Screw, cross brace in rear M6x10 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, cross member on lower
rear panel M6x12 6 Nm (4.4 lbf ft)
Loctite
®
243™
Screw, engine guard M6x8 8 Nm (5.9 lbf ft)
Screw, engine guard M6x10 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, foot brake cylinder M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, footrest bracket, rear M6 9 Nm (6.6 lbf ft)
Loctite
®
243™
Screw, front brake disc M6 14 Nm (10.3 lbf ft)
Loctite
®
243™
Screw, front wheel speed sensor M6 6 Nm (4.4 lbf ft)
Screw, fuel pump M6 6 Nm (4.4 lbf ft)
Screw, fuel tap M6 6 Nm (4.4 lbf ft)
Screw, ground wire on frame M6 6 Nm (4.4 lbf ft)
Screw, ground wire to starter
motor M6 10 Nm (7.4 lbf ft)
Screw, headlight M6x18 10 Nm (7.4 lbf ft)
Screw, headlight adapter on
headlight M6x16 5 Nm (3.7 lbf ft)
Loctite
®
243™