Husqvarna Norden 901 2022, Owner'S Manual

Page: 133 / 170

TUNING THE ENGINE 18
131
18.1 Ride Mode
V02211-01
Possible states
• Street
–
Homologated performance with balanced response;
the motorcycle traction control allows normal slip on the rear
wheel. The Anti-Wheelie mode is active.
• Rain
–
Reduced homologated performance for better rid-
ability; the motorcycle traction control allows less slip on the
rear wheel. The Anti-Wheelie mode is active.
• Offroad
–
Reduced homologated performance for better rid-
ability; the motorcycle traction control allows increased slip
on the rear wheel. The Anti-Wheelie mode is deactivated.
• Explorer (optional)
–
Setting with homologated performance
and extremely direct response. The motorcycle traction con-
trol and the characteristics of the throttle response can be
individually set. The Anti-Wheelie mode is deactivated.
Warning
Danger of accidents An incorrectly selected riding
mode makes control of the vehicle considerably more
difficult.
The riding modes are each only suitable for certain con-
ditions.
–
Always select a riding mode that suits the surface
on which you are riding, the weather and the riding
situation.
Various vehicle tunings can be selected in the combination
instrument in the
Ride Mode submenu. Street , Rain , Offroad
and Explorer are available (optional).
The riding mode selected last appears in the display.
The riding mode can also be changed while riding with a closed
throttle grip.
Info
The riding mode selection does not influence the ABS.
18.2 Motorcycle traction control (Cornering MTC)
V02213-01
The motorcycle traction control (MTC) lowers the engine torque
in case of loss of traction in the rear wheel. Depending on the
riding mode (
p. 131), different amounts of slip are allowed
when traction control is activated.
Info
When motorcycle traction control is switched off, the rear
wheel may spin during strong acceleration and on sur-
faces with low grip, resulting in a risk of falling.
After the ignition is switched on, motorcycle traction con-
trol is enabled again.
In the combination instrument, the motorcycle traction control
can be switched on or off via the
MTC submenu.