Husqvarna Norden 901 2022, Owner'S Manual

Page: 165 / 170

LIST OF SYMBOLS 30
163
30.1 Red symbols
Red symbols indicate an error condition that requires immediate intervention.
The oil pressure warning lamp lights up red
–
The oil pressure is too low. Stop immediately,
taking care not to endanger yourself or other road users in the process, and switch off the
engine.
30.2 Yellow and orange symbols
Yellow and orange symbols indicate an error condition that requires prompt intervention. Active driving aids are
also represented by yellow or orange symbols.
The general warning lamp lights up yellow
–
A note/warning note on operating safety has
been detected. This is also shown in the display.
The malfunction indicator lamp lights up yellow
–
The OBD has detected a malfunction in
the vehicle electronics. Come safely to a halt, and contact an authorized Husqvarna Motor-
cycles workshop.
The cruise control system indicator lamp lights up yellow
–
The cruise control system func-
tion is switched on, but cruise control is not activated.
Ice warning is active in the display
–
The warning lamp lights up when there is increased risk
of icy roads.
TC indicator lamp lights up/flashes yellow
–
MTC ( p. 131) is not enabled or is currently
intervening. The TC indicator lamp also lights up if a malfunction is detected. Contact an
authorized Husqvarna Motorcycles workshop. The TC indicator lamp flashes if
MTC or MSR
actively engage.
ABS warning lamp lights up yellow
–
Status or error messages relating to ABS.
30.3 Green and blue symbols
Green and blue symbols reflect information.
The idle indicator lamp lights up green
–
The transmission is in neutral.
The high beam indicator lamp lights up blue
–
The high beam is switched on.
The cruise control system indicator lamp lights up green
–
The cruise control system func-
tion is switched on and cruise control is activated.
The turn signal indicator lamp flashes green simultaneously with the turn signal
–
The turn
signal is switched on.