Husqvarna Norden 901 2022, Owner'S Manual

Page: 114 / 170

15 WHEELS, TIRES
112
–
Change all the damping rubber pieces of the rear
hub.
Finishing work
–
Install the rear wheel. ( p. 110)
–
Check the chain tension. ( p. 83)
–
Remove the rear of the motorcycle from the lifting gear.
(
p. 79)
15.6 Checking the tire condition
Warning
Danger of accidents
If a tire bursts while riding, the vehicle becomes uncontrollable.
–
Ensure that damaged or worn tires are replaced immediately. (Your authorized Husqvarna Motorcy-
cles workshop will be glad to help.)
Warning
Danger of crashing Different tire tread patterns on the front and rear wheel impair the handling char-
acteristic.
Different tire tread patterns can make the vehicle significantly more difficult to control.
–
Make sure that only tires with a similar tire tread pattern are fitted to the front and rear wheel.
Warning
Danger of accidents
Non-approved or non-recommended tires and wheels impact the handling
characteristic.
–
Only use tires/wheels approved by Husqvarna Motorcycles with the corresponding speed index.
Warning
Danger of accidents New tires have reduced road grip.
The contact surface on new tires is not yet roughened.
–
Run in new tires with moderate riding at alternating angles.
Running-in phase
200 km (124 mi)
Info
Tire type, tire condition, and tire pressure influence the braking and handling characteristics of the vehi-
cle.
Worn tires have a negative effect on handling characteristics, especially on wet surfaces.
400602-10
–
Check the front and rear tires for cuts, embedded objects,
and other damage.
» If the tires have cuts, run-in objects, or other damage:
–
Change the tires.
–
Check tread depth.
Info
Adhere to the legally required minimum tread depth.
Minimum tread depth
≥
2 mm (
≥
0.08 in)
» If the tread depth is less than the minimum tread depth:
–
Change the tires.