Husqvarna Norden 901 2022, Owner'S Manual

Page: 144 / 170

22 TROUBLESHOOTING
142
Faults Possible cause Action
The engine dies during the trip Fuse 1 , 2 or 3 blown
–
Change the fuses of individual electri-
cal power consumers. (
p. 122)
The ABS warning lamp lights
up ABS fuse blown
–
Change the ABS fuses. ( p. 121)
Wheel speeds of front and rear
wheels differ greatly
–
Stop, switch off the ignition, start
again.
Malfunction in ABS
–
Read out the ABS fault memory using
the Husqvarna Motorcycles diagnos-
tics tool.
High oil consumption Engine vent hose bent
–
Route the vent hose without bends or
change it if necessary.
Engine oil level too high
–
Check the engine oil level. ( p. 133)
Engine oil too thin (low viscos-
ity)
–
Change the engine oil and the oil filter,
clean the oil screens.
( p. 133)
The headlight, position light,
tail light, and license plate
lamp are not working Fuse 6 is blown
–
Change the fuses of individual electri-
cal power consumers. (
p. 122)
Combination instrument, brake
light, and horn are not func-
tional Fuse
5
is blown
–
Change the fuses of individual electri-
cal power consumers. (
p. 122)
Time is not displayed or not
correctly displayed Fuse 1 blown
–
Change the fuses of individual electri-
cal power consumers. (
p. 122)
12-V battery discharged Ignition was not switched off
when vehicle was parked
–
Charge the 12-V battery. ( p. 119)
The 12-V battery is not being
charged by the alternator
–
Check the charging voltage.
The combination instrument
shows nothing in the display Fuse 1 , 2 or 5 blown
–
Change the fuses of individual electri-
cal power consumers. (
p. 122)
–
Set time and date.