Husqvarna FS 450 2015, Repair Manual

Page: 33 / 249

6
FORK, TRIPLE CLAMP
31
200850-10
200835-11
Assemblin the fork le s
Info
-
Mount the screw cap with the membrane holder and tighten with the special tool.
Guideline I
Screw cap on the cartridge
I
Pin wrench (T103) ( !1ll p. 235)
-
Bleed and fill the cartridge. ( !1ll p. 34)
-
Fill the cartridge with nitrogen. ( !1ll p. 36)
-
Mount adjusting tube Ci).
I
M41x1
-
Screw nut
48
all the way on with the collar facing forward.
Info
I
30 Nm (22.1 lbf ft)
I
The nut must be screwed tightly against the stop. Do not use a tool.
The steps are identical for both fork legs.
e
/
-8
-8
200669-10
Preparatory work
-
Check the fork legs. ( !1ll p. 23)
- Assemble the screw cap with the membrane holder. (
!1ll p. 27)
- Assemble the piston rod. (
!1ll p. 28)
- Assemble the cartridge. (
I!!,! p. 29)
Main work
-
Clamp in the inner tube with the axle clamp.
Guideline
I
Use soft jaws.
-
Mount the special tool.
I
Protecting sleeve (T1401) ( !1ll p. 237)
-
Lubricate and slide on dust boot
O.
I
Lubricant (T511) ( I!!,! p. 224)
Info
Always change the dust boot, seal ring, lock ring and support ring.
Mount the sealing lip with the spring expander facing downward.
-
Slide on lock ring@}.
-
Lubricate and slide on seal ring (D.
I
Lubricant (T511) ( !1ll p. 224)
✓ Mount with the sealing lip facing downward the open side facing upward.
-
Slide on support ring
8.
-
Remove the special tool.