17 ENGINE
-
Remove stop disk
O
and 1st-gear idler gear
8.
-
Remove needle bearing
CD
and stop disk
e.
-
Remove 5th-gear sliding gear
0
and lock ring 0).
-
Remove stop disk@ and 3rd-gear idler gear@.
-
Remove needle bearing
@)
and 4th-gear idler gear Gi).
-
Remove needle bearing
48
and stop disk
48.
-
Remove lock ring� and 2nd/4th gear shift collar
4D.
-
Remove lock ring G) and stop disk Ci).
-
Remove 2nd-gear idler gear
48
and needle bearing Gi).
17.4.40 Checking the transmission
Condition
The transmission has been disassembled.
-
Check needle bearings
O
for damage and wear.
If there is damage or wear:
-
Change the needle bearings.
-
Check the pivot points of main shaft
8
and countershaft
CD
for damage and wear.
If there is damage or wear:
-
Change the main shaft and/or countershaft.
-
Check the tooth profiles of main shaft
8
and countershaft
CD
for damage and wear.
If there is damage or wear:
-
Change the main shaft and/or countershaft.
-
Check the pivot points of idler gears
8
for damage and wear.
If there is damage or wear:
-
Change the gear wheel pair.
-
Check the shift dogs of idler gears
8
and sliding gears @) for damage and wear.
If there is damage or wear:
-
Change the gear wheel pair.
-
Check the tooth faces of idler gears
8,
sliding gears @), and fixed gear 0) for damage and wear.
If there is damage or wear:
-
Change the gear wheel pair.
-
Check the tooth profiles of sliding gears
0
for damage and wear.
If there is damage or wear:
167
Summary of Contents for FS 450 2015
Page 1: ...PIONEERING SINCE 1903 REPAIR MANUAL2015 FS 450 Art no 3403022en Husqvarna MOTORCYCLES ...
Page 2: ......
Page 217: ...215 ...
