Husqvarna FS 450 2015, Repair Manual

Page: 39 / 249

6
6.27
6.28
FORK, TRIPLE CLAMP
Removin the lower tri
Preparatory work
- Raise the motorcycle with a lift stand. (
!:JI p. 10)
- Remove the handlebar cushion.
- Remove the front wheel. (
!:JI p. 93)
- Remove the fork legs. (
!:JI p. 13)
- Remove the start number plate. (
� p. 90)
- Remove the front fender. (
� p. 90)
Main work
- Take off cable holder
O
in front of the left radiator.
- Remove screw
8.
- Remove screw
@).
- Take off the top triple clamp with the handlebar and set it aside.
• Info
I
Protect the components against damage by covering them.
Do not bend the cables and lines.
- Remove O-ring
C,.
Remove protective ring
0.
- Take out the lower triple clamp with the steering stem.
- Take out the upper steering head bearing.
lnstallin the lower triple clamp
800221-10
Main work
- Clean the bearing and sealing elements, check for damage, and grease.
I
High viscosity grease ( !:JI p. 224)
- Insert the lower triple clamp with the steering stem. Mount the upper steering
head bearing.
- Check whether upper steering head seal
O
is correctly positioned.
- Slide on protective ring
8
and O-ring
@).
- Position the upper triple clamp with the handlebar.
- Mount screw
C,
but do not tighten yet.
- Secure the wiring harness with cable holder
0.
37